Buckingham's primary concern is to provide a quality product to its customers to enable them to carry out their profession in a safe
manner. However, we always require our customer’s assistance in proper equipment operation, inspection and maintenance.
Equipment Inspection
Prior to each use
:
Carefully inspect this equipment for indications of wear or deterioration. Inspection should include, but not be limited to the
following:
• webbing cuts, kinks, abrasions, burns, excessive swelling, excessive wear, discoloration, cracks, charring.
broken fibers, loose stitching, chemical or physical exposures and buckle holes in strap are not damaged.
• loose, bent or pulled rivets, bent grommets, and broken, cut, or burned threads.
• buckles do not bind and all buckles function properly.
• nicks, cracks, distortion or corrosion of hardware (buckle, D-ring, etc.)
During each use:
It is important to regularly inspect the condition and function of the equipment. Check the equipment’s connection with other
components in the system and be sure they are oriented, aligned, and functioning properly.
If equipment is compromised:
If any evidence of wear or deterioration as outlined is observed, immediately cease use, destroy the product and replace it with
new equipment. Should any unusual conditions not outlined above be observed, or you have reasonable doubt about a particular
condition, remove the equipment from service and notify your Supervisor, Safety Director or contact Buckingham Mfg.
(1-800-937-2825) for clarification.
Failure to carefully and completely inspect your equipment could result in serious injury or death!!!
CLEANING, STORAGE and TRANSPORTATION
Proper maintenance, storage and transportation of your equipment will prolong its useful life and contribute toward its
performance. Nylon and polyester should be cleaned and disinfected with water and mild soap and be allowed to air dry
thoroughly without using excessive heat. Your equipment should be stored and transported so that it does not come into contact
with moisture, ultra violet rays, extreme temperatures or chemical agents. Warnings pertaining to cleaning, storage and
transportation should be strictly adhered to.
NOTE: Ensure proper fit / size of product prior to use. This product CAN NOT be returned unless it is in new / unused
condition!
Patented
8,333,262
BUCKINGHAM MFG. CO.
1-800-937-2825
E-mail – sales @buckinghammfg.com
Web site – www.buckinghammfg.com
Information contained in these written instructions supersedes all other information (written, audio, video etc.) produced by Buckingham Mfg. prior to the revision date of this document.
Ergovation.Doc 11-3-08 (Rev. 8-18-17)
PN 230216
