Warning
Ensure Suspension Bridge has adequate tail to prevent
accidental slippage. Three inches minimum of tail exiting the
termination knot
is required as shown to the left.
Ensure to cross turns and not have them parallel as shown in the
photo to the right. The knot shown in the photo to the right is tied
incorrectly.
Assembly Completed
FRONT VIEW LEFT SIDE VIEW
Warnings
Manufacturer’s instructions shall be provided to the user of this product. If additional copy is needed, contact Buckingham
Mfg. Co.
Completely read, understand, and follow all instructions, warnings, and cautions pertaining to this and all
associated equipment before use. Failure to do so could result in your serious injury or death.
If bridge is frayed, melted, picked, hockled, cut, nicked, or unraveling, REPLACE IMMEDIATELY!!!
Use only replacement Suspension Bridges (manufactured from approved tree climbing rope) supplied by
Buckingham Mfg.
Never use combinations of components or subsystems, or both, which may affect or interfere with the safe function of each
other.
This product is designed to be used by a person with a maximum weight of 310 lbs. when fully equipped.
Weight when fully equipped relates to the individuals body weight in addition to that of his clothing, fall
protection equipment, and all tools.
Fall protection equipment, (i.e. fall arrest, work positioning belts, climbers, retrieval, suspension etc.)
should not
be resold or provided to others for re-use after use by original user as assurance cannot be granted that a used
product meets criteria of applicable standards and is safe for use to a subsequent user.
Only Buckingham Mfg. Co. or those people authorized in writing by Buckingham Mfg. Co. may make repairs to this
equipment.
Buckingham arborist saddles are manufactured to meet applicable requirements of the ASTM F887, EN 358 / 813 standards
and are intended for use as personal protection equipment only, not for towing or hoisting and when properly used, comply
with the requirements of ANSI Z133-12.
This equipment is intended for use by properly trained professionals only. Do not use without proper training.
Before use the first time, the user should carry out a suspension test in a safe place to ensure that the equipment is the
correct size, has sufficient adjustment and is of an acceptable comfort level for the intended use.
Before use of the equipment, consideration should be given as to how any necessary rescue could be safely achieved.
This equipment must only be used for the specific purpose for which it is designed and intended
Ergovation.Doc 11-3-08 (Rev. 8-18-17)
PN 230216
