LRV-1 lift control valve
41/86
300-I-9010050-E-28/02.2012
2.
Press the key
↑
several times until the display reads
Password
+ execute
3.
Press the key+
If the display reads
+ change
– log out
the user is either logged in
already, or no password is set (i.e. password is “0000").
Press one of the keys 1 to 4 to continue in parameterisation mode or
press the keys
↑
and
↓
simultaneously to quit parameterisation mode
If the display reads
+ log in
– show code
a password is set and the user is
currently not logged in.
Continue with step 4
4.
Press the key+
The display will read
Password
0
000
with the first digit signaling.
5.
Press the key+ to increase or the key– to decrease the value of
the signaling digit
6.
Press the key
↓
to select the next digit
or
the key
↑
to select the previous digit
When all digits display the desired value, with the digit currently selected
still signaling:
7.
Press the keys
↑
and
↓
simultaneously to transmit the password
If the password entered is correct, the DELCON will quit parameterisa
tion mode.
The user is logged in, parameters can be changed.
If the password entered is incorrect, the display will read
Password
not allowed
for approx. 1second, then the DELCON will quit para
meterisation mode.
In order to try again, start over pressing key4
In order to retrieve a forgotten password:
⇒
Forgotten password
Logging out
Note
: The DELCON features a counter, that logs out the user
automatically after 8hours. The proper function of the counter requires,
however, that the power supply to the DELCON will NOT be disrupted.
Disruption of the power supply causes the counter to start over, while
keeping the user logged in.
In order to log out manually:
1.
Press the key4
Operating controls and indicators
