background image

LRV-1 lift control valve

40/86

300-I-9010050-E-28/02.2012

If either no password has previously been set (i.e. password is “0000"),
or a password is set and the user is currently logged in the display will

read 

+ change
– log out

.

Continue with step4

If the display reads 

+ log in
– show code

 a password has already been set.

The user is currently not logged in.

Abort by pressing the keys 

 and 

 simultaneously

In order to continue setting a password:

4.

Press the key+

The display will read 

Password

0

000

 with the first digit signaling.

5.

Press the key + to increase
or
the key– to decrease the value of the signaling digit

6.

Press the key

 to select the next digit

or
the key

 to select the previous digit

When all digits display the desired value, with the digit currently selected
still signaling:

7.

Press the keys 

 and 

 simultaneously to transmit the password

The display will read 

Confirmation

0

000

 with the first digit signaling. The

user is prompted to enter the password a second time for confirmation.

8.

Enter the password again as described above, finish by pressing
the keys 

 and 

 simultaneously

If the two passwords entered are identical, the DELCON will quit para­
meterisation mode.

The user is logged in, parameters can be changed.

In order to log out and protect the DELCON against inadvertent para­
meterisation: 

Logging out

If the two passwords entered are different, the display will read

Confirmation
not allowed

 for approx. 1second, then change to

Password

0

000

 with the first digit signaling. The user is prompted to

repeat the complete password setting procedure.

Logging in

1.

Press the key4

The display will read 

Commands
Information list

.

Operating controls and indicators

Содержание LRV-1























































































Отзывы: