Overview
KTF/100HPS
- 1.3 -
Advantages obtained by using the SMART KTF 2000 Terminal
combined with KTF/100HPSs
!
Using the SMART KTF 2000 terminal connected to KTF/100HPS devices you have
the possibility to develop a wide range of functions which facilitate the practical use of
the installed KTFs
(immediate download and upload of data)
, as well as to display
fundamental data such as, yarn consumed and yarn tension.
!
Possibility to create up to 99 “articles”, saving them into the Data Base for an easy
subsequent recall. Without the need to setup new parameters, these will simply be
called from the Data Base and subsequently transferred to the KTF/100HPS devices
installed on textile machine.
!
Possibility to control and quickly correct the stitch adjustments, thus eliminating the
defects due to unbalanced stitch consumption.
!
Possibility to identify the connected KTF/100HPSs using an automatic numbering
procedure
(BTSR Patent).
!
Monitoring and control possibility of the stitch consumption related to the article
under production, by means of the
CONTROL
function.
In
CONTROL
environment, a yarn consumption self learning function
(
LEARN
)
is
available
(BTSR Patent)
. With this function you can learn the amount of yarn fed
during a sample cycle and then check that such amount is kept constant during the
subsequent cycles, within the tolerance limits
(+ and -)
; in case of deviation from
these limits the textile machine will be stopped.
!
For more details, please refer to the SMART KTF 2000 operating manual.
Further Advantages obtained by using a PC or Notebook Connected to
the KTF/100HPS Device via Serial Line
!
Using the PC-LINK KTF Studio software or other application programs specifically
developed by BTSR, you will have the possibility to upgrade
(via serial line)
the
KTF/100HPS device firmware, without the need to physically replace the
microprocessor. In addition, the PC-LINK KTF Studio software offers several analysis
and monitoring facilities that make easier the tuning of control parameters to the
production managers.
!
Possibility to display in real-time up to 4 control graphics related to as many
KTF
devices.
!
Possibility to display/save and print
(for each graphic)
up to 7 different control
parameters
(work tension, min/max tension, motor torque, motor speed, inlet tension).
!
Possibility to immediately check the efficiency degree of
KTF
devices by comparing
the yarn inlet tension
(not regulated)
with the outlet tension
(regulated by the
KTF
device).
!
Possibility to check
(or compare)
the results obtained with two different versions of
device control firmware.
!
For more details, please refer to the PC-LINK KTF Studio Operating Manual.
