Technical data and installation
- 2.12 -
KTF/100HPS
Instructions for Correct Yarn Threading
!
When using bare elastomers, make just
1
coil around
the roller
#
without passing neither above nor below
the separation device
"
!
When using covered elastomers, make
3
to
5
coils
around the roller
#
!
When using nylon or cotton with continuous
processing
(smooth stitch),
make
3
coils around the
roller
#
, passing over the separation device
"
!
When using nylon or cotton yarn with discontinuous
processing and high stitch feeding variation, due to
patterns or sudden yarn feeding changes, make just
1
coil around the roller
#
!
After having wound the desired number of coils
around the roller, pull out the yarn from the bottom
routing it over the loading cell
(tension sensor).
!
For a correct separation of yarn coils on coil
separation device
"
, slightly tilt the separation
device, while the KTF is running, using the
adjustment screw
!
.
1 coil
3 to 5 coils
Loading Cell
Hex Screw