55
Part 6
Getting more out of Plusdeck2c
54
www.plusdeck.com
●
In case there is no sound in created files, the sound card setting needs to be
changed as shown in the picture on the left.
1. Check the sound card setting in the control panel
Windows98 : Start
1
Control Panel
1
Multimedia
WindowsXP : Start
1
Control Panel
1
Sound and Audio devices
1
Audio tab
2. Sound playback and recording device must use the same device. If Sound
recording appears gray, the sound card driver needs to be reinstalled.
3. Click Volume in Sound recording and check if Stereo Mix is selected. The Stereo
Mix volume level should be increased if it is set too low.
Problem/Solution
The name Stereo Mix may be called differently in some sound cards. The item
which corresponds to Stereo Mix must be selected.
In order to find the correct one, refer to the manual or select the item one by one
to find which one successfully saves.
Problem/Solution
The items on the Recording control window are sound sources which the PC can
recognize. Only one sound source can be selected. When converting the tape, the
PC accepts sound from Line In source. When saving PC output sound, the PC
accepts sound from Stereo Mix source.
Note