53
1. Start the software.
2. File setting can be changed by clicking Configure button. The setting does not
need to be changed each time because the previous setting is stored.
3. Click Save button in PC
▶
Digital File menu.
4. Specify a folder and file name when Save As window appears.
(Special characters such as ?./ can not be used in the name.)
5. If you click Save button, PC output sound is recorded as a file.
6. Click
■
(Stop) button to stop recording.
7. File is stored first as native wave format. If mp3 format is selected, wave file is
compressed to mp3 and wave file is removed afterward.
8. If wave format is selected, the process ends without mp3 compression process.
(If the intended job is to make an audio CD, it is recommended that file be stored
as wave format.)
Saving PC output sound as digital file
3
Part 6
Getting more out of Plusdeck2c
52
www.plusdeck.com
●
If the above step does not fix the problem, Line In of the sound card functions as
Line Out or it is out of order.
1. In the program which controls the sound card, check if Line In jack is set to Line
Out jack.
2. If none of the above fixes the problem, it is likely that Line In of the sound
card(Line In) is out order. You should use a different sound card.
Problem/Solution 2
Even if the sound card driver is not installed, the sound card can output sound.
However, the sound card driver must be installed to use Plusdeck2c as it uses
other sound card functions also.
Note
Specify a folder and file name
Compressing wave to mp3
