35
Part 5
Using Plusdeck2c
34
www.plusdeck.com
●
1. Wet tapes(can cause rust in the deck)
2. Physically bent or damaged tape
3. Tape with loose label or partly detached label
Do not use the Following Tapes
2
1. Insert the tape as shown in the picture on the left.
2. If you push the tape gently, it is inserted by itself.
3. Do not insert the tape by force. It can damage the deck.
4. The Plusdeck2c recognizes the top of the inserted tape as A side.
5. When the tape is inside the deck, the swinging door in the front face may look
open.
6. Make sure the tape is well winded before inserting. A loosened tape could get
entangled.
7. Foreign materials inserted inside the deck could damage the deck.
Inserting the tape
1
■
When the tape can not be inserted, the possible causes are
A. The tape is bent significantly
B. The power supply problem - the power cable is connected upside down or
the power cable is dead
Caution
Side A
Caution
■
Do not leave the tape inside the deck for long when it is not in use.
■
When longer tapes(C-90 or C-120 minutes) are used, a care must
be given to prevent any damage as these tapes are thinner than C-60
minute tapes.
Caution
