Part 4
Getting Started
32
www.plusdeck.com
●
Using Plusdeck2c
1. Inserting the tape
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
34
2. Plusdeck2c hardware
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
36
1. Command Buttons
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
36
2. LED lights
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
38
3. Using Software
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
39
1. Operating Deck
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
39
2. Converting and Recording
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
40
3. Menu List
⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯⋯
46
3
1. The problem with the serial cable
①
The serial cable is not properly connected. (See page 17)
②
The serial cable you are using is not provided by us. (The Plusdeck2c uses 1:1
direct communication. The crossly connected serial cable will not work with the
Plusdeck2c.)
③
The pin in the serial cable has been bent.
2. The problem with the serial port
①
The serial port is already in use by other device.
- Other program (including previously installed program) may be blocking the
serial port. This program must be removed.
②
The serial port is set to disable at the BIOS setup.
- Change the setting to auto or enable.
3. Others
①
When there is no power supplied
②
When multiple Plusdeck2c software’s were launched
③
When the serial port has gone bad
Software will not run
Problem / Solution
If the serial port is not available or out of order, a PCI
RS232 expansion card can be used to make an additional
serial port. An unknown serial port problem may go
away if you use a PCI RS232 card.
Note
