BTL BTL-07p Скачать руководство пользователя страница 18

BTL – 07p  

operating manual & user's guide 

page 18 

AMP: FM 90 - 140 Hz, fluently 3/3/3 - program 0945, threshold motor sensitive intensity

 

M.piriformis l.dx.;indifferent electrode minimum 6 x 6 cm, lateral on the right thigh (tr.iliotibialis) 
Application time: 6 minutes (for ultrasound frequency use the step method; if the ultrasound intensity is fixed 
the application time can be 5 - 10 minutes, step 1 minute) 
Frequency: First, 3 procedures daily, later every second day 
Total number of treatments: 6 

Ultr TENS (transcutaneous electrostimulation) 

While emphasis was placed on myorelaxation, therapy of hyperalgetic zones and trigger points in the 
aforementioned types of combined therapy, a combined US and TENS treatment is applied as a general 
analgesic, not only for the above mentioned reflex changes but also for other kinds of pains. In these cases, we 
recommend that you review the list of pains that ultrasound can treat because not every pain can be treated with 
an ultrasound. The combined US and TENS treatment can be used for myalgia (post-injury, reflexive, etc.), post-
traumatic pain (after 24 - 36 hours), lege artis during the whole therapy (relaxation, decompression, etc.) The 
preferred TENS impulses are symmetric biphasal or alternating biphasal impulses - program numbers 10, 11, 13, 
14, 16, and 17 (the galvanic effect is omitted). When the degree of pain is small, use continual (conventional) or 
random TENS; when the degree of pain is greater, use a basic TENS 100 Hz frequency and 2-8 Hz burst 
frequency. The intensity should always be as high as the patient can stand it. This combination will have a faster 
effect than other sequential procedures. However, it is important to keep in mind all the contraindications for 
ultrasound (see Operator’s Manual - Ultrasound). 

Mechanism of action 

Reducing the

 

perception of pain

 

positively affects the trophic

 

in the injured area. The simultaneous ultrasound 

application followed by increased capillary permeability, improved extravasal liquid absorbtion, 
increased vasoactive amines secretion

 

and the influence on the pre-capillar spfincters are considered the most 

effective prevention against the algodystrophic syndrom

.

 Physical therapy in the

 

porouses area is contraindicated. 

Use the segmental method only for trophicus. 

Application time 

Status acutus : 3 - 5 minutes. 
Status subacutus : 3 - 10 minutes (you may use the positive step method). 

Intensity 

The ultrasound intensity - see above. The continuous TENS

 

intensity abovethreshold sensitive

 - 

at the highest

 

tolerable level, TENS burst at highest tolerable level. Use the TENS surge with the above threshold motor

 

intensity for the trigger points or application to spastic muscles. 

Total number of treatments 

Individual, usually 1 - 6 treatments in one therapy. 

Frequency of treatment 

Usually daily application. In selected cases, every second day as the sessions come to an end. In segemental 
long term treatments(sy. Sudeck, for example)., we recommend ending the therapy by slowly decreasing the 
frequency of treatments (three times a week, twice a week, once a week and then ending the therapy

 

 

Procedure prescription 

Same as the ultr low frequency therapy combination (see above). 

A therapeutic example 

Large haematoma in m.quadriceps femoris after contusion, more than 24 hours after injury, very painful. 
Haematoma gravis reg.m.quadricipitis fem. l. sin.,S 70.1, acutus 
Combined therapy ultr TENS burst (BTL-06 + BTL-07p) 
Ultrasound: 1MHz, 1:16 PPR, 1 W/cm

2

, emitter head 4 cm

2

, semistatic application 

TENS: burst, symetric biphase impulse, f = 100 Hz, f

burst 

= 5 Hz = program 1332, intensity at the highest tolerable 

level 
Location: Haematoma on the anterior surface of the left thigh, indifferent electrode minimum 6x6 cm on 
the posterior surface of the thigh opposite the haematoma 
Application time: 2-10 minutes, step 2 minutes 
Freqency: First, 3 procedures daily, later every second day 
Total number of procedures: 5 

Содержание BTL-07p





























Отзывы: