![background image](http://html1.mh-extra.com/html/bticino/l4561n/l4561n_instruction-sheet_2825169032.webp)
L4561N
32
3 CONFIGURATION
Before programming the
Stereo Control
(it must not be connected to the BUS):
S
= 1 – 4
device address in the system
M1
=1 – 4 (indicate the number of Hi-Fi system modules, e.g. Radio, CD…, which the
Stereo Control
must manage)
Connect the BUS cable and then the RCA-RCA cable and the IR jack.
3.1 PROGRAMMING
To program item L4561N use the TiStereoControl software supplied in the CD which comes with
the device, referring to its manual.
3.2 RESET
Restore the factory settings as follows:
- Switch the
Stereo Control
off
- Configure: S = – ; M1 = – ; M2 = 9
- Switch the device back on and wait for LED 3 to light up
- Switch off and restore the configuration
If the multi-channel matrix (item F441M) is used, only one Hi-Fi system module can be ma-
naged, so configure M1=1.
Содержание L4561N
Страница 59: ......