32
Digital DMR and Analog
UHF/VHF Two Way Radio
with opposite TX/RX frequncies.
Repeater: Enable communications via a repeater system.
Double Slot: When TX/RX frequency is same, turn on this function to
communicate by the slot set in simplex mode.
Note:
If DMR mode not choosed Doulbe Slot, the radio will work on Slot in
repeat mode. if choose Double Slot, it is necessary to Double choose a slot
by time slot setting.
※
Chan Set
When the channel type is analog, it will automatically hide the digital menu,
The menus listed below are for analog channel only, unlisted menus are
the same as the digital channel, please refer to Chan Set (Digital Channel).
(4)
TCDT
Set up the CTCSS/DCS code for the TX.
(5)
RCDT
Set up the CTCSS/DCS code for the RX.
(6)
RTCDT
Set up the CTCSS/DCS code for both TX and RX
CTCSS code: 62.5Hz~254.1Hz, a total of 51 groups
DCS code:
000N~777I
, a total of 1024 groups.
(7)
Optional Signal
Allows the setup of DTMF/5TONE/2TONE encode and decode for the
Analog channels.
(10)
Squelch mode
When the analog channel is set up for both CTCSS/DCS decoding and
optional signaling, you can set up the RX condition in this menu.
SQ: You can hear the call once the channel receives a matched carrier.
CDT: You can hear the call when receives a matched CTCSS/DCS signal.
TONE: You can hear the call when receives matched signaling.
C&T: You can hear the call when receives a matched CTCSS/DCS and
matched signaling.
C|T: You can hear the call when receives a matched CTCSS/DCS or
matched signaling.
(10)
Band Width
Choose wide band or narrow band for the analog channel.
7. MAIN MENU FUNCTIONS
