27
Digital DMR and Analog
UHF/VHF Two Way Radio
instead of pressing the [PTT] key. A total of 3 levels are provided.
(10)
VOX Delay
When the VOX is enabled, set up the VOX delay to help to extend the
transmission time to avoid stopping a transmission too early. 0.5s-3s, a
total of 26 times offered.
(11)
Scan Mod
SCM TO:
When scanning and stopping for a signal, stays at the channel
5s before resuming the scan.
SCM CO:
When scanning and stopping for signal, stays at the channel
until the signal disappears, and resumes scan 2s later.
SCM SE:
When scanning and stopping for a signal, will terminate the scan.
This function is only valid for a VFO scan.
(12)
DTMF Speed
Offers DTMF encode speed which will help the receiver decode
successfully, 50~500ms are the options.
(13)
FM Radio
Turn on or off the FM radio.
(14)
FM Radio Moni
Radio Mon On: When the FM radio is used, you can still receive or transmit
on the channel.
Radio Mon Off: When the FM radio is used, the radio will not permit a
transmission or reception.
(15)
Man Down Alarm
When the function is on, the radio will start sending the alarm if the radio is
falling to the ground. Raise the radio to stop the alarm.
When GPS is on and positioning successfully, it will auto send out the GPS
information when the radio starts the alarm.
(16)
Start Up Pwd
On:
Set up the password for start up. You need to input the password to power
on the radio.
Off:
No password is required for the radio power on start up.
The password shall be set up in CPS-Optional Setting-Power on-Power-on
Password Char.
7. MAIN MENU FUNCTIONS
