28
Digital DMR and Analog
UHF/VHF Two Way Radio
7. MAIN MENU FUNCTIONS
(17-18)
AuRepeater A or B (For VFO A or B)
Turn on the Auto Repeater function, the TX frequency in VFO mode will
auto increase or reduce frequency based on the programmed offset
frequency in CPS.
Off: Turn off the function.
Positive: TX frequency= RX fre Offset frequency.
Negative: TX frequency= RX frequency - Offset frequency.
(19-22)
VFO SC-MinU/MaxU/MinV/MaxV (For VFO scan ranging setting)
VFO Scan is only valid in VFO frequency mode. Press the "VFO Scan" key
to turn on/off the VFO scan.
The radio will scan the frequency range between VFO scan start frequency
and VFO Scan end frequency, at the frequency step selected in CPS or in
Radio Menu.
VFO SC-MinU: Set start frequency for a UHF VFO scan
VFO SC-MaxU: Set end frequency for a UHF VFO scan
VFO SC-MinV: Set start frequency for a VHF VFO scan
VFO SC-MaxV: Set end frequency for a VHF VFO scan
(24)
SMS Format
M-SMS: Allows SMS text communication with Motorola DMR radio.
H-SMS: Allows SMS text communication with Hytera DMR radio.
(25)
CTC Ste (Squelch Tail Eliminate)
In case of active CTCSS, the STE function will eliminate the noise burst at
the end of reception of the transmitted signal.
(26)
No-Signal Ste
Normal Squelch Tail Eliminate(STE) setting will be monitored (no signaling).
(27)
Time Zone
Set up the time zone of your location.
(28)
Time Display
Set On to show the date/time on display.
Set Off to hide the date/time display.
(29)
Date Time
Time Set:
Allows to set up the date and time manually. Use the
/
key to set the current year. Move to the month by pushing the
key. Set
the month, and use the
key to move forward each step. Once done,
click the Menu key to save the date and time.
