BT Redcare Secure Mk3, Инструкция по установке, техническому обслуживанию и эксплуатации

Страница: 26 / 44

July 2013 © British Telecommunications plc 2013
Page 24
PSTN Pre-dial string (F7)
The unit is supplied with the necessary telephone numbers to dial the BT Redcare servers
when in PSTN mode.
At some sites it may be necessary to add a predial number to the telephone number. i.e. a
digit 9 to gain an outside line on a business line.
A predial string of up to 8 digits can be configured through the F7 menu.
Example. Changing the unit to dial 9 with a 1 second pause.

Access the button config menu by holding M for 3 seconds.

Repeatedly Press M until F7 is displayed.

Press S to enter the predial sub menu. (the display shows the first predial digit 1 x)

Repeatedly press S to step the first predial digit to 9.

Press M to move to the second predial digit. (the display shows the 2nd predial digit 2
x)

Repeatedly press S to step the 2
nd
predial digit to P for a 1 second pause.

Press M to move to the 3
rd
predial digit. (the display shows the 3rd predial digit 3 x)

Set the 3
rd
predial digit to blank. (this indicates the end of the predial string).

Press M to return to the F7 main menu.

Repeatedly press M to scroll to the ?? (save changes question marks)

Press S and the ?? will flash to prompt “Are you sure?”

Press S and the unit will briefly display Pr (program) as the changes are written to
flash. The unit will then restart.
At any time the configuration mode can be exited, without saving changes, by holding down M
for 5 seconds.
Tip. The predial special characters for * and # are shown on fig. 14.
Tip. P will give a 1 second pause.
Tip. The ‘close square bracket’ symbol tells the unit not to dial the leading zero on the
telephone number. This is useful for using the unit outside of the UK, where an international
dialling code may be required as the predial string.
i.e. A predial string of 0044] may be used from some countries where 00 is the international
access code.