6 Connect the 3-pin adaptor into
a convenient mains socket
When the power is switched on, the red LED
display on the base unit will come on and the
digital voice prompt will give the status of the
machine.
You will hear:
‘Saturday 12.01 pm’
Your outgoing message is: ‘Hello, your call
cannot be taken at the moment, so please leave
your message after the tone.’
These are the factory settings of your
answering machine, and can be altered to suit
your own requirements.
If you have a power failure or switch off your
Freestyle 1500 Plus at the mains for any
significant amount of time and you have not
fitted back-up batteries (see page 6), your
Freestyle 1500 Plus will revert to these settings.
7 Place the handset on the
base unit
The base unit’s red
CHARGING
light comes on.
The handset display shows
HSET 1
.
Setting up
8
For best reception
For the best operating conditions, try to place the
base unit away from large metal objects and other
electrical appliances.
8 Leave the handset to charge
for 24 hours
Your Freestyle 1500 Plus handset can be placed
on the base either face up or face down.
9 Extend the base unit telescopic
aerial
Extend the base unit telescopic aerial on your
Freestyle 1500 Plus (as shown below) to
ensure the best possible signal and reception.
