BSL Strautmann Sherpa 1201, Перевод оригинальной инструкции по эксплуатации

Страница: 85 / 133

Service and maintenance of machine
Sherpa 1201 / 1401 85
●
rear-view camera and outside mirrors for proper setting, functioning and damage.
●
all liquid filling-up points for tightness.
●
all screwed connections of the chassis for firm seat.
●
the hydraulic hoses and screwed connections for tightness and firm seat.
●
the oil level of all gearboxes and axles.
●
the tyre pressure.
●
the tyres for damage and sufficient tread depth (minimum 2 mm).
●
the level of the engine oil, coolant and hydraulic oil.
Clean:
●
the air filter element.
●
the cooling system for coolant, charge air, hydraulic oil (in case of difficult conditions even
several times a day).
Regularly
Check:
●
all conveyor belts (outside and inside), conveyor drive components (driving rollers, carrying
rollers and pulleys), conveyor cover strips, conveyor bearings and bearing housings for
contamination (bumps in the conveyor belt!), damage, proper seat and functioning.
●
the central lubrication (optional extra) for proper functioning: Do all lubrication points have a
sufficient grease collar? Is sufficient grease available in the reservoir? Top up the reservoir
before the minimum level is reached!
●
the Fast-Cut cutting knives (optional extra) for deformation and wear; readjust or replace them if
necessary.
●
the 6 mm slide plates of the Fast-Cut cutting knives (optional extra) for wear; turn them over
(wear on one side) or replace them (wear on both sides) if necessary.
●
the contamination indicator of the hydraulic oil return-flow filter (on the outside of the hydraulic
oil tank) and of the hydraulic oil intake of the feed pump (in the engine compartment); replace
the filters in case of extensive contamination (shop work!).
●
electrical lines for damage and proper installation.
●
batteries for sufficient charge.
●
the distance between dosage gate and mixing container.
●
the concentration of the anti-freezing agent in the coolant system (in winter).
Top up windscreen washing water.
Every 50 service hours
Check:
●
all wheel nuts for tightness, retighten if necessary.
●
the hydraulic hoses and screwed connections for tightness and firm seat.
●
the fastening screws of the cutting unit guard (optional extra) for tightness; retighten them if
necessary.
Every 100 service hours
Check:
●
the gear lubricant oil level of the mixer gearbox.
●
all screwed connections of the chassis for firm seat (once).