manualshive.com logo in svg

BSH HBG633BS1, Инструкции по ремонту

Поделиться
Скачать
BSH HBG633BS1 Скачать руководство пользователя страница 63

Test

2017-03-23 / DIS 184_58300000197442_ARA_EN_A

Copyright by BSH Hausgeräte GmbH

Page 63 of 101

5.12

Check the heat-resistance of the fitted units

The admissible cabinet temperature must not exceed the room tempe

70 K(EN 60335).
According to the data sheet (AMK-MB-001 issue date 07/2007) of the working

group "Arbeitsgemeinschaft Die Moderne Küche e.V. (AMK)" the admissible

temperature for the thin parts of cabinet panels is 65 °C and 90 °C for the body.
This applies in particular to veneers, edging, plastic surfaces, adhesives and paint.
In order not to exceed the limit for the adjacent cabinets, lateral ventilation slots

between the front of the unit and cabinet body are provided.
Cooling air from around the appliance's housing is aspirated by the cooling fan

through these ventilation slots and blown out to the front. The vapour from the

appliance is discharged and mixed with the cooling air. For this reason, there must

be an air gap of 5 mm between the appliance and adjacent cabinets.

The cooling air supply to the appliance must not be affected.
Installation of thermal insulation strips is not required
Installation of thermal insulation strips is prohibited for compact

microwave appliances.

1. Determine heat-resistance of the fitted unit
2. Check ventilation holes and installation in accordance with the installation

instructions.

3.

Check the temperature of the furniture surfaces according to the

instructions. (Page 71)

Содержание HBG633BS1






































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды