9
Charger has
no DC output?
Error RED
LED is
Flashing.
- Output is short circuited
- Reverse polarity connection to
Battery
- Check DC connection between
charger and battery and make sure
they are not short circuiting.
- Check that the crocodile clips
haven’t fallen off the battery.
- Check that the crocodile clips /
ring terminals are connected to the
correct polarity.
No Charging
Current?
Error RED
LED is
Flashing
- Battery is severely sulphated
- Battery has a damaged cell
- Overheat protection mode
- Check the Battery condition, age
etc.
- Battery may need replacement.
- Move battery & Charger to cooler
environment
Long charging
time, Full light
does not come
on?
Error RED
LED is
Flashing
- Battery capacity too large
- Battery is defective
- Check the charger specification
matches the battery capacity.
- Battery cannot be charged and
must be replaced.
MAINTENANCE
The charger is maintenance free. If the power cord is damaged, the charger must be left to the
reseller for maintenance. The case should be cleaned occasionally. The charger should be
disconnected from the power while cleaning.
