3
o
Maintenance Ch Rejuvenation
Charge & Maintain - Automatic Charge:
On power up, the charger will automatically go
to charging system, then could be left unattended and never overcharge your batteries.
Charge & Maintain - Automatic Maintenance:
When the battery is charged to "full" state,
the charger automatically switches to maintain the battery. It will monitor the battery voltage
and continue to peak performance to the battery.
Battery Type Select Switch
: Select Lead Acid or Gel Batteries.
Short circuit protection:
The charger will automatically turn off when the output short
circuit occurred and prevent any damage.
Reverse polarity protection:
The charger can automatically shut off when the output
polarity reversed and without damage.
Never overcharge your battery
Heavy-Duty cables
Corrosion-resistant output connectors
Output clips and ring terminals provided:
It comes with a quick connect fly lead and 2
different kinds of connectors, crocodile clips and a ring terminals. The ring terminals are
perfect for permanent connection to your battery. You can connect the lead to the battery and
tuck the lead away while you are using your vehicle and when you get back to your garage
simply plug the lead back into the charger.
TEMPERATURE & SAFETY PROTECTION:
The charger contains 4 safety protections:
INTERNAL OVERHEAT PROTECTION
: The BS20 is built-in with overheat and overload
electronic circuit. When the charger is overheated, the charger will shut down shortly. If
temperature is decreased, the charger will resume to normal charging.
OVERLOAD PROTECTION
: The charger employs the use of a
‘
Solid State Circuit
Interrupter
’
that opens under severe overload. This condition may occur if attempting to
charge any severely discharged or heavily sulfated battery. Once the Interrupter opens, the
charger will stop charging for a short period and then resume charging automatically and the
Charging LED will be OFF, until resume charging. Overloading could be due to an external
load, remove the load condition prior to attempting to recharge the battery.
REVERSE POLARITY
: The charger has reverse battery and short circuit protection. If a
reverse battery or charger output lead short condition exists (Red LED flashes, while output
leads are connected backwards), simply unplug charger from AC power and properly remake
the connections as described in this manual.
SHORT CIRCUIT PROTECTION
: The charger has reverse battery and short circuit
protection. If a reverse battery or charger output lead short condition exists (Red LED flashes,
while output leads are connected backwards), simply unplug charger from AC power and
properly remake the connections as described in this manual. The charger employs the use of
solid state circuit protectors on both the input and output sections (as compared to unreliable
bimetallic automatic breakers), that will permanently open during a catastrophic failure like
the shorting of output leads while charging or lightening strikes etc.
