Brute MagnaTech BMGH1600, Инструкция по установке и эксплуатации

Страница: 12 / 116

Page 8 B
RADFORD
W
HITE
be of the same cross-sectional area as the free
area of the openings to which they connect.
Method 1
: Two permanent openings, one
commencing within 12” (300 mm) of the top
and one commencing within 12” (300 mm) of
the bottom, of the enclosure shall be provided.
The openings shall communicate directly, or
by ducts, with the outdoors or spaces that
freely communicate with the outdoors. When
directly communicating with the outdoors,
or when communicating to the outdoors
through vertical ducts, each opening shall
have a minimum free area of 1 square inch
per 4000 Btu/hr (550 square mm/kW) of total
input rating of all equipment in the enclosure.
When communicating to the outdoors through
horizontal ducts, each opening shall have a
minimum free area of not less than 1 square
inch per 2000 Btu/hr (1100 square mm/kW)
of total input rating of all equipment in the
enclosure.
Method 2 : One permanent opening,
Section 3
VENTING AND COMBUSTION AIR
3.1 Combustion Air
MagnaTech boilers and water heaters
must have provisions for combustion and
ventilation air in accordance with the applicable
requirements for Combustion Air Supply and
Ventilation in the National Fuel Gas Code,
ANSI Z223 1; or in Canada, the Natural Gas
and Propane Installation Code, CSA B149.1.
All applicable provisions of local building codes
must also be adhered to.
A MagnaTechs can take combustion air
from the space in which it is installed, or
the combustion air can be ducted directly to
the unit. Ventilation air must be provided in
either case.
3.1.1 Combustion Air From Room
In the United States, the most common
requirements specify that the space shall
communicate with the outdoors in accordance
with Method 1 or 2. (See the following
descriptions.) Where ducts are used, they shall
Table 3. Ducted Air Accessories
(Place in section 3.1)
Model 1600 Model 2000 Model 2500 Model 3000 Model 3500 Model 4000
Screen for horizontal galvanized air pipe D2012104 D2012101 D2012101 D2012102 D2012103 D2012103
Screen for horizontal PVC air pipe CA012004 CA012001 CA012001 CA012002 CA012003 CA012003
Screen for horizontal polypropylene air pipe CA012204 CA012201 CA012201 CA012202 CA012203 CA012203
Screen for vertical galvanized air pipe D2012204 D2012201 D2012201 D2012202 D2012203 D2012203
Screen for vertical PVC air pipe CA012404 CA012401 CA012401 CA012402 CA012403 CA012403
Screen for vertical polypropylene air pipe CA012604 CA012601 CA012601 CA012602 CA012603 CA012603
Table 3a - Ducted Air Accessories
(Place in section 3.2)
Model 1600 Model 2000 Model 2500 Model 3000 Model 3500 Model 4000
Horizontal vent terminal for stainless steel D2012004 D2012001 D2012001 D2012002 D2012003 D2012003
Screen for horizontal CPVC vent CA012104 CA012101 CA012101 CA012102 CA012103 CA012103
Screen for vertical stainless steel vent D2012304 D2012301 D2012301 D2012302 D2012303 D2012303
Screen for vertical CPVC vent CA012504 CA012501 CA012501 CA012502 CA012503 CA012503
Table 3* - Vent Accessories
(Place in section 3.5)
Model 1600 Model 2000 Model 2500 Model 3000 Model 3500 Model 4000
Air intake screen for unit placed outdoors CA0011904 CA011901 CA011901 CA011902 CA0011903 CA0011903
Vent terminal for unit placed outdoors CA011803 CA011801 CA011801 CA011802 CA011803 CA011803
Table 3** - Air & Vent Accessories for Units Placed Outdoors
Table 4. Required Combustion Air Pipe Material
Material United States Canada
ABS ANSI/ASTM D1527 The air pipe material must be chosen based upon
the intended application of the boiler, and must
be installed according to the vent manufacturer’s
installation instructions.
PVC, sch. 40 ANSI/ASTM D1785 or D2665
CPVC, sch. 40 ANSI/ASTM F441
Single wall galv. steel 26 gauge
Polypropylene ULC S636 Class 2C