Brusa ICS115, Руководство по эксплуатации

Страница: 35 / 68

7.6 Troubleshooting by the User
For the following errors, limited troubleshooting can be undertaken by the user. The troubleshooting is to be
undertaken as described in this chapter. The user is forbidden to undertake further troubleshooting that goes
beyond the troubleshooting specified in this chapter. In the following, situations are described as can occur during
the operation. The troubleshooting is to be undertaken and performed in the given order for exactly that situation
description that applies to the current situation.
SITUATION TROUBLESHOOTING
It is not possible to position the
vehicle for a charging operation. 1. Check, whether your vehicle is switched on. The positioning function only works
when readiness to drive is established. In addition the confirmation of your
consent for the charging operation is required via the interface of the vehicle.
2. Check, whether the GPM has shifted. If so, bring it back to that position, that
was determined in chapter 12.5.1 .
3. Check, whether the GPM can be supplied with power. For this, establish
whether the power supply for the GPM has been interrupted by electrical safety
devices. If so, re-establish the power supply for the GPM, by switching on the
electrical safety device.
4. Check, whether the WLAN connection between CPM and GPM is faulty.
If necessary repeat the positioning process.
5 . If the error still occurs, contact customer service.
The charging operation is
aborted again immediately after
the start.
1. Check, whether the GPM is free of foreign objects. If necessary clear it, taking
into consideration the information specified in chapter 8.1.2 .
2. Check, whether the charging function has been and can be interrupted by
people or animals. If necessary, prevent the access to the charging station.
3. Check, whether the GPM can be supplied with power. For this, establish
whether the power supply for the GPM has been interrupted by electrical safety
devices. If so, re-establish the power supply for the GPM, by switching on the
electrical safety device.
4. Check, whether the difference in height between GPM and CPM has changed
in an inadmissible way, e.g. due to a great deal of snow on the car tires or on the
ground, on which the GPM is installed.
5. If the error still occurs, contact customer service.
35
Operation Manual
Inductive Charging System
I
CS115