NOTICE
Apart from the cleaning in chapter
all maintenance measures may only be performed by
specialists!
Contact customer service to have measures carried out for the maintenance of the ICS! This way
you avoid material damage to the ICS or the loss of the warranty.
The ICS system consists of the components CPM and GPM. In the framework of the guarantee it is possible to
have these two components inspected by specialists, if failure symptoms are evident. Contact customer service for
this. The contact details can be found in chapter
Consumables or individual replacement parts are not required or provided for the CPM or the GPM of the ICS
system.
If a warranty case occurs, the respective components are to be replaced exclusively by specialists. In particular,
renewed work for the installation of the components is also to be carried out by specialists. If individual components
have to be replaced, the descriptions for the preparation of the ICS for use or for deinstallation in chapter
are to be observed for the removal of the old components and the installation of the new components.
8.1
Cleanliness
8.1.1 Cleanliness of the CPM
NOTICE
For the CPM regular cleaning by the user is not intended and also not permitted. Non-observance of
this notice can result in damage to the CPM.
8.1.2 Cleanliness of the GPM
CAUTION
Do not perform cleaning during and immediately after the charging process!
Keep the GPM clean and remove objects in its close proximity, which would lie under the vehicle
during the charging process. In particular no cables may be routed over the GPM. During the
charging process, objects in the charging area may have heated up. Touching these objects can lead
to injuries due to burning.
NOTICE
Deviation from recommended measures for cleaning can result in damage to the GPM.
During use the GPM must be kept clean. It is recommended to keep the GPM clean by means of the following
measures:
37
Operation Manual
Inductive Charging System
I
CS115