Manual clearing of the GPM surroundings
Sweeping off the GPM
Moist wiping of the GPM with a mild cleaning agent
Cleaning the fan intake duct
In particular the following measures should not be applied to keep the GPM clean:
High-pressure cleaner, e.g. Kärcher
(strong) chemical cleaning agent
Road sweeper
Snow plough
8.2
Behavior after a vehicle accident
After an accident with the vehicle in which the CPM is installed, the CPM must be inspected for functionality by a
specialist.
9
Deinstallation
NOTICE
Measures for the deinstallation and disposal may only be performed by specialists!
Contact customer service to have measures performed for the maintenance of the ICS! This way you
avoid material damage or dangers for nature and the environment!
The deinstallation of the GPM is described in chapter
10
Disposal
The disposal of the ICS is carried out by customer service after the deinstallation of the system from the vehicle
(CPM) or from the charging station (GPM).
10.1 Notes for Customer Service
A basic prerequisite for the reuse and the recycling of used electronic devices is the correct disposal.
According to the EU-Directive 2012/19/EU, since 24
th
March 2006 electrical devices may no longer be disposed of
together with the household waste, but must be collected and gathered separately by a specialist company. The
disposal by a specialist company contributes significantly towards avoiding dangers for people and nature. In the
case of disposal we therefore recommend that you contact a recognized specialist waste management company.
Operation Manual
Inductive Charging System
ICS115
38