BRP E 250 L HO AG B, Руководство по обслуживанию

Страница: 407 / 460

407
Gearcase
Shifter, Bearing and Seal Servicing
14
Remove any nicks or burrs on front of bearing
housing.
For seal and bearing service refer to Propeller
Shaft Bearing Housing Service on p. 387.
Assembly
Position the forward gear bearing housing assem-
bly on a flat, level surface. (Mirror or glass can be
used.) Use depth gauge to measure distance from
flange of housing to flat surface as shown.
Add the appropriate shims to create a dimension
of 0.140 in. (3.556 mm).
To determine thickness of shims; use the following
example:
1
.389 in. reading on the gauge
+ 0.011 in. shims required
= 1.400 in. required dimension
Apply Needle Bearing grease to the thrust bear-
ing. Position bearing around shoulder on the pro-
peller shaft.
Apply Needle Bearing grease to the thrust washer.
Place washer in recess of bearing housing.
Coat bearing surfaces of propeller shaft with gear-
case lubricant. Slide the propeller housing onto
the propeller shaft.
IMPORTANT:
Use caution when assembling the
propeller shaft in the bearing housing. Thrust bear-
ing must remain around shoulder on the propeller
shaft.
Apply gearcase lubricant to the threads of the for-
ward gear bearing housing.
1. O-ring groove 009568
1. Flange 009564
1
1
1. Thrust bearing
2. Thrust washer
009565
009566
2
1