User’s Guide
Version 1.0
User
User
is a category of commands that configures controller interface settings, affecting the user’s
interface: redirection URL, free sites (walled garden), system management access, administrator
login/password.
A full list of all available
user
commands/subcommands and their parameters is
available in the Appendix section:
C) CLI Commands and Parameters.
In general, the
user
command usage is as follows:
user <command> <subcommand1> <subcommand2> [-parameter] <value>
To get the full list of the
user
commands, type:
user ?
Figure 59 – User Commands List
To get a list of all-available subcommands for a specific command, type:
user <command> ?, (e.g. user walled_garden ?)
All available subcommands for walled garden (free sites) are displayed:
Figure 60 – Configure User Interface (1)
To configure selected user interface settings, type:
User <command> <subcommand1> <subcommand2> [-parameter] <value>,
(e.g. user walled_garden url A -u www.gemtek-systems.com -s gemtek site),
where parameters are as follows:
A – action: add URL
-u – define URL address
-s – define URL description, visible for user:
Figure 61 – Configure User Interface (2)
If successful, a message regarding the successful completion is displayed;
otherwise, an error message is displayed.
BROWAN Page
51
