Browan BW1330 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 70

background image

Copyright

© 2002-2006 Browan Communications.

This user’s guide and the software described in it are copyrighted with all rights reserved. No part of
this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form by any means without the written permission of Browan
Communications.

Notice

Browan Communications reserves the right to change specifications without prior notice.

While the information in this manual has been compiled with great care, it may not be deemed an
assurance of product characteristics. Browan Communications shall be liable only to the degree
specified in the terms of sale and delivery.

The reproduction and distribution of the documentation and software supplied with this product and
the use of its contents is subject to written authorization from Browan Communications.

Trademarks

The product described in this book is a licensed product of Browan Communications.

Microsoft, Windows 95, Windows 98, Windows Millennium, Windows NT, Windows 2000, Windows
XP, and MS-DOS are registered trademarks of the Microsoft Corporation.

Novell is a registered trademark of Novell, Inc.

MacOS is a registered trademark of Apple Computer, Inc.

Java is a trademark of Sun Microsystems, Inc.

Wi-Fi is a registered trademark of Wi-Fi Alliance.

All other brand and product names are trademarks or registered trademarks of their respective
holders.

National Radio Regulations

The usage of wireless network components is subject to national and or regional regulations and laws.
Administrator must ensure that they select the correct radio settings according to their regulatory domain. Refer
to the

B) Regulatory Domain/Channels

chapter in the appendix to get more information on regulatory domains.

Please check the regulations valid for your country and set the parameters concerning frequency, channel, and
output power to the permitted values!

BROWAN Page

1

«
1
2
3
4
5
...
»

Содержание BW1330







































































Отзывы:

Нет отзывов

Похожие инструкции для BW1330

Бренд: Waxess Страницы: 27

Бренд: Modecom Страницы: 48

Бренд: NETGEAR Страницы: 2

UniFi AP BeaconHD

Бренд: Ubiquiti Страницы: 11

Бренд: Amigo Страницы: 9

Бренд: TP-Link Страницы: 2

Verizon Jetpack AC791L

Бренд: NETGEAR Страницы: 2

Бренд: MOBIDATA Страницы: 30

Бренд: Dell Страницы: 16

Бренд: Dell Страницы: 5

Networking 207 Series

Бренд: Dell Страницы: 4

Бренд: Dell Страницы: 2

Бренд: Dell Страницы: 4

Бренд: Dell Страницы: 2

Бренд: Dell Страницы: 2

Бренд: Dell Страницы: 2

W-IAP270 Series

Бренд: Dell Страницы: 20

Бренд: Dell Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды