User’s Guide
Version 1.0
Connection
Connection
is a category of command that is related to the user’s connection with the device.
A full list of all available
connection
commands/subcommands and its parameters
is available in the Appendix section:
C) CLI Commands and Parameters.
In general, connection usage is as follows:
connection <command> <value>
To get a list of all available commands in the connection category type:
connection ?
Figure 52 – Connection Commands
Network
Network
is a category of commands that configures controller interface settings, DNS, DHCP, UAT
and RADIUS settings.
A full list of all available
network
commands/subcommands and its parameters is
available in the Appendix section
C) CLI Commands and Parameters.
The
network
commands themselves contain several subcommands and the subcommands again
contain several parameters. In general,
network
command usage is as follows:
network <command> <subcommand1> <subcommand2> [-parameter]
<
value>
To get a list of all available commands in the configure category, type:
network ?
Figure 53 – Network Commands List
To get a list of all-available subcommands for a specific command, type:
network <command> ?, (e.g. network radius ?)
All available subcommands for radius are displayed:
BROWAN Page
48
