BRÖTJE IDA Скачать руководство пользователя страница 29

Страница: 29 / 48

4.4

Advanced settings

4.4.1

Resetting to default settings

You can reset most of the IDA settings to their default settings at the same

time.

Important

All connection settings for communication will be deleted too!

The temperature schedules, control mode and holiday period

will not be reset.

1. Enter the main menu.

2. Select Settings.

3. Select the submenu Reset to default settings.

4. Select Reset.

5. Confirm the selection.

The display will show ‘welcome’ in all languages.

6. Press the select button to continue.

The setup procedure will start.

For more information, see

Setup procedure, page 41

4.4.2

Check for software update

If your IDA is connected to Wi-Fi, the internet and the server, software will

be updated automatically. It’s possible to manually check the status of the

software:

1. Enter the main menu.

2. Select Settings.

3. Select the submenu Check for software update.

The status of the software appears on the screen.

4.4.3

Temperature calibration

You can manually calibrate the temperature if the IDA displays a

temperature that does not correspond with the actual room temperature.

This procedure should normally not be necessary.

1. Wait for at least 30 minutes after installation of the IDA.

2. Measure the actual room temperature.

3. Enter the main menu.

4. Select Settings.

5. Confirm the selection.

6. Select Temperature calibration.

7. Confirm the selection.

The display shows the temperature measured by the IDA as

Temperature detected.

8. If the detected temperature does not match with the temperature you

have measured: turn the rotary dial to change the temperature at

Calibrate this temperature to.

9. Confirm the change.

Important

It may take some time before the IDA shows the new offset on

the Current Temperature.

The new offset will be used over the entire temperature range.

Fig.41

AD-3001012-01

bienvenido

welkom

welcome

benvenuto

velkommen

willkommen

bienvenue

Fig.42

AD-3001252-01

....... ....... : 0.0 ..

4 Customisation

7726708 - v.01 - 18012019

Содержание IDA

















































Результаты поиска

Содержание IDA

Отзывы:

Похожие инструкции для IDA

Бренды по названию

Популярные бренды

BRÖTJE IDA, Руководство пользователя

Результаты поиска

Содержание IDA

Отзывы:

Похожие инструкции для IDA

Бренды по названию

Популярные бренды