Brother PJ-822, Руководство пользователя

Страница: 164 / 199

Paper Settings Tab
Paper Size
Select the default paper size.
Form Length
This parameter can be set only when Paper Size is set to Custom .
Form length is determined by specifying the number of lines per page, or the length in inches of each page.
The available settings differ depending on the selected
Text Line Spacing settings.
Bottom Margin
The setting specified for this parameter takes effect only when Paper Size is set to Custom .
The height of the bottom margin is expressed in lines of text. The available settings differ depending on the
selected
Text Line Spacing settings.
Text Line Spacing
Specify the height of each line of text.
Left Margin
Specify the left margin.
Right Margin
Specify the right margin.
Default Pitch
Specify character width.
CR-LF Mode
Specify how the printer responds when LF (line feed) and CR (carriage return) commands (ASCII characters
10 and 13) are received.
Roll Printer Case Setting
Specify the setting for using the optional roll printer case. Depending on the selected option, you can adjust
the feed value or amount of paper retraction for the roll printer case.
Option Description
Off Select this option when not using the roll printer case.
On (Without Anti Curl) Select this option when not using the anti-curl
mechanism while using the roll printer case.
On (With Anti Curl) Select this option when using the anti-curl mechanism
while using the roll printer case.
On (Short Feed) Using the roll printer case with paper passed through
the anti-curl mechanism causes the paper to have
pressure marks. Use this option to make sure the
pressure marks are not printed.
Print Length Scaling
Specify the reduction or enlargement ratio for printing.
Tear Distance Adjust
Adjust the Tear Bar tear-off position for paper media.
Form Feed Mode
Specify how the printer responds to form feed commands received from any source.
Paper Grip Time
Specify the delay before the printer grabs the paper.
160