Brother PE-Design 8, Инструкция по эксплуатации

Страница: 233 / 269

231
Creating Custom Fonts (Font Creator)
Cr
e
a
ting Cus
tom Font
s
(F
ont Cr
e
a
tor
)
Editing the Points of a Font Character
Pattern
Editing points and
reshaping patterns
1.
Click on the Tool Box.
2.
Click the pattern that you want to edit.
→
The points in the pattern appear as small
white squares or circles.
3.
To edit a point, click the point to select it.
→
The selected point appears as a small
black square or circle.
• To move the point, drag it to the new
location.
→
All of the selected points move in the
same direction.
• To insert a point, click the line to add a new
point.
→
A new point appears selected (as a small
black square).
• To delete the point, click Edit , then Delete ,
or press the key to remove the
point.
Editing points
The lines connected to a point can be changed to
either straight lines or curves. In addition, the lines
at a point can be smoothed out or straightened.
1.
Select a point in the same way that a point is
selected in “Moving points”.
2.
Click Edit , then Point .
3.
Click the desired command.
• Click To Straight to transform the lines at the
selected point to straight lines.
• Click To Curve to transform the lines at the
selected point to curves.
• Click To Smooth to smooth out the lines at the
selected point on a curve.
• Click To Symmetry to symmetrically transform
the lines at the selected point on a curve.
• Click To Cusp to transform the selected curve to
a pointed path.
b
Memo:
You can only select one pattern at a time.
Delete
b
Memo:
• To select multiple points, hold down the
key while clicking the points, or
dragging the pointer over the points.
• Hold down the key while pressing the
key or key. The selection
direction changes to the end start point.
• Hold down the key while dragging the
points. The points are moved horizontally or
vertically.
• Press an arrow key. The points move in the
direction of the arrow on the key.
Ctrl
Ctrl
Shift