Brother P-Touch PT-H100, Руководство по обслуживанию, Страница: 24 / 81

III - 1
CHAPTER III DISASSEMBLY & REASSEMBLY
■
Safety Precautions
(1) You should carry out disassembly & reassembly jobs on an anti-static sheet
grounded correctly. Otherwise, the LSI and other electronic devices will be
damaged due to the electricity charged in your body.
(2) When transporting PCBs, be sure to wrap them in conductive sheets such as
aluminum foil.
(3) When using soldering irons and other heat-generating tools, take care not to
damage the resin parts such as wires, PCBs, and covers.
(4) Be careful not to lose screws, washers, or other parts removed for parts
replacement.
(5) Tighten screws to the torque values listed below.
■
Tightening Torque List
■
Lubrication List
Lubricant type: Kanto-Kasei BG-MU
• Tip of the cutter lever : Ø 3 mm
• Shaft of the double gear 1 : Ø 2 mm
• Shaft of the double gear 2 : Ø 2 mm
Location Screw type Q'ty Tightening torque
Bottom cover
FG harness
Frame ASSY
Sensor frame 12 ASSY
DC motor ASSY
Sensor hold plate
Frame cover Taptite, bind B M2.6 x 10
Taptite, bind B M2.6 x 6
Taptite, bind B M2.6 x 6
Screw, bind M3 x 4
Screw, pan 1.7 x 3
Taptite, bind B M2 x 4
Taptite, bind B M2.6 x 6 6
1
2
1
2
1
2 0.392 ±0.098 N·m (4.0 ±1.0 kgf·cm)
0.245 ±0.049 N·m (2.5 ±0.5 kgf·cm)
0.245 ±0.049 N·m (2.5 ±0.5 kgf·cm)
0.588 ±0.098 N·m (6.0 ±1.0 kgf·cm)
0.147 ±0.049 N·m (1.5 ±0.5 kgf·cm)
0.147 0/0.049 N·m (1.5 0/0.5 kgf·cm)
0.245 ±0.049 N·m (2.5 ±0.5 kgf·cm)