Wireless Configuration for Macintosh using the Brother installer application (For HL-5370DW)
80
5
j
Read the
Important Notice
to enable the wireless interface. Hold down the
Go
button for 10 seconds,
and then release the
Go
button when the printer prints a Network Configuration page. Check the box
after you confirm the wireless setting is enabled, and then click
Next
.
Note
To confirm the wireless setting is enabled, check the text to the right side of
IEEE 802.11b/g
in the
Node
Type
section on the Network Configuration page.
Active
means that the wireless setting is enabled and
Inactive
means that the wireless setting is disabled. If the wireless setting is disabled, press the
Go
button
for 10 seconds again.