Wireless configuration for Windows
®
using the Brother automatic installer application (For HL-5370DW)
54
4
p
If your network is configured for Authentication and Encryption, the following screen will appear.
When
configuring your Brother wireless machine, you must ensure that it is configured to match the
Authentication and Encryption settings you wrote down on page 46 for your existing wireless
network.
Choose the
Authentication Method
and
Encryption Mode
from the pull-down list in each
setting box. Then enter the
Network Key
and
Confirm Network Key
, and then click
Next
.
Note
• If you want to setup or configure additional WEP key indexes other than WEP key1, click
Advanced
.
• If you do not know the Authentication or Encryption settings for your network, contact your network
administrator.
• If you are using WEP and the printed Network Configuration page in
shows
Link OK
in the
Wireless
Link Status
, but the machine is not found on your network, make sure you entered the WEP key
correctly. The WEP key is case sensitive.