Brother HL-1250 Скачать руководство пользователя страница 240

Страница: 240 / 441

2001/10/02

CHAPTER 5 PJL - 36

6.5.

Reset Command

The

PJL RESET

command resets the PJL Current Environment variables to the User Default values.

Use this command at the end of any PJL jobs in which the

PJL SET

command was used.

Syntax

@PJL RESET [<CR>]<LF>

Parameters

•

The

RESET

command has no parameters

•

When an application such as a Spooler or Print Data Generator uses the

SET

command to set PJL variables,

the application has to conclude with the

RESET

command (before the

UEL

command) to return the variables

to the previous state.

•

The

RESET

command resets the environment variables to their user default values.

In any case, the

RESET

command resets the PJL Current settings for all personalities to the User Default

values.

•

Use the

@PJL INFO VARIABLES

command to obtain valid variables and the range of values for each

variable. This command requests this information directly from the printer.

Examples

@PJL COMMENT Reset variables to <CR><LF>

@PJL COMMENT control panel settings <CR><LF>

@PJL SET RESOLUTION = 300 <CR><LF>

@PJL SET RET = DARK <CR><LF>

@PJL ENTER LANGUAGE = PCL <CR><LF>

@PJL COMMENT Reset to return to <CR><LF>

@PJL COMMENT control panel settings <CR><LF>

@PJL RESET <CR><LF>

<ESC>%-12345X

6.6.

Set Command

The

SET

command enables you to change the value of PJL Current Environment variables during a PJL job

until a PJL reset condition resets the default values.

Use this command to make a job-specific environment.

Syntax

@PJL SET [LPARM :

personality

] variable =

value

[<CR>]<LF>

•

LPARM :

Personality

This optional parameter is used to set personality(emulation) -specific environment variables.

•

variable =

value

This parameter sets one of the environment variables to the specified value.
For example,

@ PJL SET RESOLUTION = 300

command sets the current resolution to 300 dpi. For a list of

variables and values, see the following table.

•

Use the

@PJL INFO VARIABLES

to obtain valid variables and the range of values for each variable. This

command can request this information directly from the printer.

Parameters

•

The printer control panel setting values and the feature settings stored in NV-RAM are not affected by the
values modified with the

SET

command.

•

The setting values selected with the

SET

command are valid until the next PJL reset condition occurs.

•

If the SET command is used in a job, use the

RESET

command after the job to reset the printer to User default

settings.

Содержание HL-1250


























































































































































































































































































































































































































































Результаты поиска

Содержание HL-1250

Отзывы:

Бренды по названию

Популярные бренды

Brother HL-1250, Техническое справочное руководство

Результаты поиска

Содержание HL-1250

Отзывы:

Бренды по названию

Популярные бренды