Brother DCP-L5500D, Руководство по обслуживанию

Страница: 131 / 408

2-96
Confidential
4.3.2 Troubleshooting according to image defect
End users can solve problems related to image defect as long as they follow the User Check
items. If the problem still cannot be solved, implement each procedure according to the step
numbers in the tables below.
 Light
<User Check>
• Check the usage environment of the machine. Using the machine in
hot-humid or cold-dry conditions can cause this problem.
• If the whole page is light, toner save mode may be ON. Turn OFF
the toner save mode.
• Replace the drum unit with a new one.
• Replace the toner cartridge with a new one.
• Turn ON the power switch, and leave the machine for a while
(condensation).
• Check that the paper is not damp.
• Use specified paper.
Step Cause Remedy
1
Dirt on the electrodes of the drum
unit and those of the machine Clean the electrodes of the drum unit and
those of the machine. (Refer to
Fig. 2-8 and
Fig. 2-9 .)
2
Dirt on the electrodes of the toner
cartridge and those of the machine Clean the electrodes of the toner cartridge
and those of the machine. (Refer to
Fig. 2-8
and Fig. 2-9 .)
3
Dirt on the electrodes of the
machine Clean the electrodes of the machine.
(Refer to
Fig. 2-9 .)
4 Fuser unit failure Replace the fuser unit.
5
High-voltage power supply PCB
failure Replace the high-voltage power supply PCB
ASSY.
6 Main PCB failure Replace the main PCB ASSY.
7 Laser unit failure Replace the laser unit.