Brother DCP 8060, Руководство по обслуживанию

Страница: 398 / 495

App. 3-1 Confidential
EEPROM CUSTOMIZING CODES
This function allows you to customize the EEPROM according to language, function settings, and
firmware switch settings.
Operating Procedure
(1) Press the [Menu] and [Start] keys. Next press the [ ] key four times to make the machine
enter the maintenance mode.
TIP: FAX models equipped with numerical keypads can enter the maintenance mode in the
same way as conventional models; that is, by pressing the [Menu] , [*] , [2] , [8] , [6] and
[4] keys in this sequence.
The machine beeps for approx. one second and displays “ ” on the
LCD.
(2) Press the [7] and [4] keys in this order in the initial stage of the maintenance mode.
The current customizing code (e.g., 0002 in the case of DCP-8060 Canada model) appears.
(3) Enter the desired customizing code (e.g., 0001 in the case of DCP-8060 U.S.A. model). The
newly entered code appears.
To enter letters “A” through “F”, press the
[1] through [6] keys while holding down the
[#] key, respectively.
NOTE: If a wrong 4-digit code is entered, the machine will malfunction.
(4) Press the [Start] key.
The machine saves the setting and returns to the initial stage of the maintenance mode.
If you press the
[Stop/Exit] key or no keys are pressed for one minute in the above procedure,
the machine stops the procedure and returns to the initial stage of the maintenance mode.