manualshive.com logo in svg

Brother DCP 8060, Руководство по обслуживанию

Поделиться
Скачать
Brother DCP 8060 Скачать руководство пользователя страница 14

 xiii 

Confidential

 

REGULATION 

LASER SAFETY (100 - 120V MODEL ONLY) 

This printer is certified as a Class 1 laser product under the U.S.  Department of Health and Human 
Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and 
Safety Act of 1968.  This means that the printer does not produce hazardous laser radiation. 

Since radiation emitted inside the printer is completely confined within protective housings and 
external covers, the laser beam cannot escape from the machine during any phase of user 
operation. 

 

FDA REGULATIONS (100 - 120V MODEL ONLY) 

U.S. Food and Drug Administration (FDA) has implemented regulations for laser products 
manufactured on and after August 2, 1976. Compliance is mandatory for products marketed in the 
United States. One of the following labels on the back of the printer indicates compliance with the 
FDA regulations and must be attached to laser products marketed in the United States. 

The label for Japanese manufactured products 

MANUFACTURED: 

     

Brother Industries, Ltd., 

 

15-1 Naeshiro-cho Mizuho-ku Nagoya, 467-8561 Japan 
This product complies with FDA performance standards for laser 
products except for deviations pursuant to Laser 
Notice No.50, dated July 26, 2001.

 

 

The label for Chinese manufactured products 

MANUFACTURED: 

     

BROTHER TECHNOLOGY (SHENZHEN) Ltd 

 

NO6 Gold Garden Ind. Nanling Buji, Longgang, Shenzhen, 
China. 
This product complies with FDA performance standards for laser 
products except for deviations pursuant to Laser 
Notice No.50, dated July 26, 2001.

 

 

The label for Vietnamese manufactured products 

MANUFACTURED: 

Brother Industries (Vietnam) Ltd. 

 
Phuc Dien Industrial Zone Cam Phuc Commune, Cam giang Dist 
Hai Duong Province, Vietnam 

This product complies with FDA performance standards for laser 
products except for deviations pursuant to Laser Notice No. 50, 
dated July 26, 2001. 

 

Caution 

Use of controls, adjustments or performance of procedures other than those specified in this User’s 
Guide may result in hazardous radiation exposure. 

C 

 

Содержание DCP 8060
















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды