Brother BAS H series, Инструкция по эксплуатации

Страница: 47 / 141

CHAPTER 3 PROGRAMMING PATTERNS
BAS H series, Programmer
39
Moving an outline component point
1.
Touch
.
2.
Touch
.
3. Touch to set the selection method (Manual
select, Range select) and method for moving the
cursor (Move freely, Snap to needle point).
* If the method for moving the cursor is set to "Move
freely", the cursor can be moved to any desired position.
* If the method for moving the cursor is set to "Snap to
needle point", the cursor will move to the sewing point.
■ Selecting continuous component points for
editing
4. Touch to set the selection method to "Range
select".
5. Use to move the cursor to the start point
for the range that you would like to select.
* You can move the cursor continuously by holding down
the key.
6. Press .
7. Use to move the cursor to the end point
of the range that you would like to select. The
component points will change to red, and the points
from the start point to the end point will be selected.
* You can move the cursor continuously by holding down
the key.
8. Press once, and then use the jog key to move
the cursor to the place where you would like to
move the component point.
9. Press .
■
Manually selecting component points for
editing
4. Touch to set the selection method to
"Manual select".
5. Use to move the cursor to the component
point that you would like to move.
* You can move the cursor continuously by holding down
the key.
6
When you press the key once, the component
point will change to red and it will be selected.
When you press the key once, the selected
component point will be unselected.
7. If there is more than one component point that you
would like to move, repeat steps 5 and 6.
* To select all outlines
Hold down to select all component points in
an outline.
* To unselect all outlines
Hold down to unselect all selected component
points.
8. Press once, and then use the jog key to move
the cursor to the place where you would like to
move the component point.
9. Press .
Selection method
Selection method
Selection method
Method for
moving the cursor
Method for
moving the cursor
Method for
moving the cursor