Brother BAS H series Скачать руководство пользователя страница 41

Страница: 41 / 141

CHAPTER 3 PROGRAMMING PATTERNS

BAS H series, Programmer

Moving an outline by an offset

1. Touch

2. Touch

3. Use

to position the cursor at the outline

which you would like to move by an offset.

4. When you press the

key once, the outline will

change to red lines and it will be selected.

When you press the

key once, the selected

outline will be unselected.

* Outlines which consist of stitches/feeding/basting

and outlines which have been loaded from *.SEW
files cannot be moved by an offset.

5. If there is more than one outline that you would like to

move by an offset, repeat steps 3 and 4.

* To select all outlines

Hold down

to select all outlines.

* To unselect all outlines

Hold down

to unselect all selected outlines.

6. Touch

to set the offset direction (Inside/Left

Side, Outside/Right Side) and the offset width.

7. Press

Copying an outline by an offset

1. Touch

2. Touch

3. Use

to position the cursor at the outline

which you would like to copy by an offset.

4. When you press the

key once, the outline will

change to red lines and it will be selected.

When you press the

key once, the selected

outline will be unselected.

* Outlines which consist of stitches/feeding/basting

and outlines which have been loaded from *.SEW
files cannot be copied by an offset.

5. If there is more than one outline that you would like to
copy by an offset, repeat steps 3 and 4.

* To select all outlines

Hold down

to select all outlines.

* To unselect all outlines

Hold down

to unselect all selected outlines.

6. Touch

to set the offset direction (Inside/Left

Side, Outside/Right Side), the offset width, the
number of offset copies (1 to 99) and the offset
creation method (Same Direction, Return,
stitch connection).

7. Press

Offset direction

Offset width

Number of offset copies

Offset creation method

Содержание BAS H series













































































































































Результаты поиска

Содержание BAS H series

Отзывы:

Бренды по названию

Популярные бренды

Brother BAS H series, Инструкция по эксплуатации

Результаты поиска

Содержание BAS H series

Отзывы:

Бренды по названию

Популярные бренды