Brother 888-P30, Руководство по эксплуатации

Страница: 27 / 60

Embroidering Preparation
25
EMB
R
OI
DE
R
Y
2
Follow the steps below to prepare the machine for
embroidery.
Attaching the embroidery unit
a
Turn off the machine.
b
Insert the embroidery unit connection into the
connection port until it snaps into place.
Chapter
2
EMBROIDERY
Embroidering Preparation
Step
#
Aim Action Page
1 Checking the
needle Use needle 75/11 for
embroidery. 24
2 Embroidery unit
attachment Attach the embroidery unit. 25
3 Bobbin thread
setup For the bobbin thread, wind
embroidery bobbin thread and
set it in place. 17
4 Fabric
preparation Attach a stabilizer material to
the fabric, and hoop it in the
embroidery frame. 27
5 Embroidery
frame
attachment Attach the embroidery frame
to the embroidery unit. 29
6 Pattern selection Select an embroidery pattern. 30
7 Checking the
layout Check and adjust the size and
position of the embroidery. 32
8 Embroidery
thread setup Set up embroidery thread
according to the pattern. 33
Step 2
Step 1
Step 4
Step 5
Step 3
Step 6, 7
Step 8
IMPORTANT
• Before attaching the embroidery unit, be sure
to turn off the machine. Otherwise, the
machine may be damaged.
• Keep your hands and other objects away from
the embroidery carriage and frame when they
are moving. Otherwise, damage or
malfunction may occur.
CAUTION
• Do not move the machine with the embroidery
unit in place. The embroidery unit may be
dropped and cause injury.
Note
• Make sure that there is no gap between the
embroidery unit and the machine, otherwise the
embroidery pattern may not be embroidered
correctly.
IMPORTANT
• Do not push on the carriage when attaching
the embroidery unit to the machine, otherwise
damage to the embroidery unit may result.
• Do not touch the connector in the embroidery
unit connection slot. The connector could be
damaged, and it may cause malfunctions.
• Do not lift up on the embroidery carriage, and
do not forcefully move it. It may cause
malfunctions.