Embroidering
36
■
If the thread breaks or the bobbin runs out of
thread during embroidering
a
Press the “Start/Stop” button to stop the machine.
b
Touch
and thread the upper thread or install the
bobbin thread again.
• If the bobbin thread is almost empty, press
(Thread cutter button) to cut the upper and bobbin
threads, remove the embroidery frame, and then
replace the bobbin with one wound with thread.
c
Touch .
d
Touch
,
, or
to move the needle back the
correct number of stitches before the area where the
thread broke, and then touch
.
• Touch
to restart from the beginning.
e
Lower the presser foot and press the “Start/Stop”
button to continue embroidering.
■
Resuming embroidery after turning off the
power
The current color and stitch number are saved when
embroidery is stopped. The next time the machine is
turned on, you have the option to continue or delete the
pattern.
Adjusting thread tension
The upper thread tension is changed.
a
Touch .
b
Touch
to loosen the upper thread tension. (The
tension number will decrease.)
Touch
to tighten the upper thread tension. (The
tension number will increase.)
c
Touch .
■
Correct thread tension
The thread tension is correct when upper thread is just
visible on the wrong side (bottom) of the fabric.
Memo
• If you cannot move back to the area where the
thread broke, touch
to select the color and
move to the beginning position of that color, then
use
,
or
to move ahead to slightly
before where the thread broke.
1
Right side (top) of
fabric
2
Wrong side (bottom)
of fabric
