Brother 888-K80 Скачать руководство пользователя страница 12

Страница: 12 / 68

Names of Machine Parts

■

Embroidery unit

Frame-securing lever (page 29)

Embroidery unit connection (page 25)

Carriage (page 25)

Release button (page 26)

■

Operation buttons

“Start/Stop” button

Press the “Start/Stop” button to start or stop embroidering.
The button changes color according to the machine’s
operation mode.

Needle position button

Press the needle position button to raise or lower the needle.

Thread cutter button

Press the thread cutter button after embroidering is stopped to

cut both the upper and the bobbin threads.

■

Operation panel and operation keys

LCD (liquid crystal display) (touch panel)

Selected pattern settings and messages are displayed.
Touch the keys displayed on the LCD to perform operations.
For details, refer to “LCD Operation” on page 12.

Previous page key

Displays the previous screen when there are items that are not
displayed on the LCD.

Next page key

Displays the next screen when there are items that are not
displayed on the LCD.

Help key

Touch to get help on using the machine.

Settings key

Touch to set the needle stop position, the buzzer sound, and
more.

Embroidery key

Touch to display the pattern type selection screen.

Back key

Touch to return to the previous screen.

Presser foot/Needle exchange key

Touch this key before changing the needle, the presser foot,
etc. This key locks all key and button functions to prevent
operation of the machine.

Green:

The machine is ready to embroider or is
embroidering.

Red:

The machine cannot embroider.

Orange:

The machine is winding the bobbin thread, or
the bobbin winder shaft is moved to the right
side.

b c

Note

• The operation keys of this machine are capacitive

touch sensors. Operate the keys by directly
touching them with your finger.

• Since the operation keys react differently

depending on the user, adjust the setting for
“Adjusting input sensitivity for operation keys” on
page 14.

• When using an electrostatic touch pen, make sure

that its point is 8 mm or more. Do not use a touch
pen with a thin point or a unique shape.

b
c

Содержание 888-K80





































































Результаты поиска

Содержание 888-K80

Отзывы:

Похожие инструкции для 888-K80

Бренды по названию

Популярные бренды

Brother 888-K80, Руководство по эксплуатации

Результаты поиска

Содержание 888-K80

Отзывы:

Похожие инструкции для 888-K80

Бренды по названию

Популярные бренды