LCD Operation
12
d
When the machine is turned on, the opening movie is
played. Touch anywhere on the screen.
e
To turn off the machine, press the left side of the main
power switch (set it to “
”).
Viewing the LCD
An opening movie may be displayed when the power is
turned on.
When the opening movie is displayed, the screen will be
displayed if you touch the LCD with your finger.
Touch a key with your finger to select the stitch pattern, to
select a machine function, or to select an operation indicated
on the key.
1
Embroidery pattern categories (page 31)
2
Wireless LAN key
Set the wireless LAN connection. (page 15)
If
is displayed, update the software. (page 59)
3
Pattern retrieve key (page 46)
4
Touch this key to position the embroidery unit for
storage.
Settings screen
Touch
to change the default machine settings. Touch
or
, after you changed necessary settings.
Note
When you first turn on the machine:
• Select the display language for the LCD.
• The following message about a wireless LAN
connection appears. To set up a connection, touch
, and then refer to steps
c
through
f
in
“Using the wizard to set up the wireless network
connection” on page 15 to finish setting up a
wireless LAN connection.
LCD Operation
Memo
• The latest version of software is installed in your
machine. Check with your local authorized Brother
dealer or at https://s.brother/cphaq/ for available
updates.
• You can save the current settings screen image in
a USB flash drive by touching
when the USB
flash drive is inserted into the USB port. The files
are saved in a folder labeled “bPocket”.
4
3
1
2
