Brother 888-G30 Скачать руководство пользователя

Страница: 97 / 124

Embroidering

BRO

ER
Y

Finish embroidering the remainder of the pattern.

Using a frame pattern to make an appliqué

You can use frame patterns of the same size and shape to
create an appliqué. Embroider one pattern with a straight
stitch and one pattern with a satin stitch.

■

Method 1

Select a straight stitch frame pattern. Embroider the
pattern onto the appliqué material, then cut neatly
around the outside of the shape.

Embroider the same pattern from step

onto the

base fabric.
Apply a thin layer of fabric glue or a temporary spray
adhesive to the back of the appliqué created in step

. Attach the appliqué to the base fabric matching

the shapes.

Select the satin stitch frame pattern of the same shape
as the appliqué. Embroider over the appliqué and base
fabric from step

to create the appliqué.

■

Method 2

Select a straight stitch frame pattern, and embroider
the pattern onto the base fabric.

Place the appliqué fabric over the pattern embroidered
in step

and embroider the same pattern on the

appliqué fabric.

• Be sure that the appliqué fabric completely covers

the stitched line.

Remove the embroidery frame from the embroidery
unit, and cut around the outside of the stitches of the
appliqué fabric.

Reattach the embroidery frame to the embroidery unit.

Select the satin stitch frame pattern of the same shape
as the appliqué and embroider the satin stitch pattern
to create an appliqué.

• Do not change the size or position of the pattern.

Note

• Do not remove the fabric from the embroidery

frame to cut it. Also, do not pull or push on the
fabric. Otherwise, the fabric may loosen in the
frame.

Содержание 888-G30





























































































































Результаты поиска

Содержание 888-G30

Отзывы:

Похожие инструкции для 888-G30

Бренды по названию

Популярные бренды

Brother 888-G30, Руководство по эксплуатации

Результаты поиска

Содержание 888-G30

Отзывы:

Похожие инструкции для 888-G30

Бренды по названию

Популярные бренды