Brother 888-G30, Руководство по эксплуатации

Страница: 72 / 124

Utility Stitches
70
■
Joining
Decorative bridging stitches can be sewn over the seam
allowance of joined fabrics. This is used when making a
crazy quilt.
a
Attach zigzag foot “J”.
b
Sew together the right sides of the two pieces of fabric,
and then open up the seam allowances.
c
Select a stitch.
• For details, refer to “Stitch Chart” on page 45.
d
Turn the fabric over so that the right side faces up, and
then sew over the seam with the center of the presser
foot aligned with the seam.
■
Multi-directional sewing (straight stitch and
zigzag stitch)
Use these stitch patterns to attach patches or emblems to
pant legs, shirt sleeves, etc.
• For details, refer to “Stitch Chart” on page 45.
Insert the tubular piece of fabric onto the free-arm, and
then sew in the order shown in the illustration.
a
Remove the flat bed attachment.
b
Attach monogramming foot “N”.
c
Select stitch .
d
Lower the needle into the fabric at the beginning of the
stitching, and then start sewing.
Lower the needle at the upper-right corner.

The fabric is fed toward the back of the machine, as
usual.
e
After you have sewn to the corner, stop the machine,
and then select stitch
.
f
Start sewing.

The fabric is fed to the right.
g
After you have sewn to the corner, stop the machine,
and then select stitch .
h
Start sewing.

The fabric is fed forward.
i
After you have sewn to the corner, stop the machine,
and then select stitch
.
j
Start sewing.

The fabric is fed to the left.
k
After you have sewn to the corner, stop the machine,
and then select stitch again.
l
After sewing 3 to 5 stitches at the beginning of the
stitching, stop the machine.
No. 2-07 2-08 2-09
Stitch
No. 5-01 5-02 5-03 5-04
Stitch
No. 5-05 5-06 5-07 5-08
Stitch
1 3
4
2
Memo
• The feeding direction of the fabric differs
depending on the stitch that is selected. Be sure to
guide the fabric while machine is sewing.