CHAPTER 9 NOVELL NETWARE PRINTING
9-18
Assigning the Remote printer name and number using BRCONFIG
7.
a.
Execute the BRCONFIG from the Windows
®
menu or insert the
Brother Print / Fax server Software diskette in Drive A: of your PC
and type:
A:BRCONFIG
b.
Select the Brother Print / Fax server from the list of Print / Fax
servers. When you get the message that the Print / Fax server is
connected, press the ENTER key and type Where the default
password "access" in response to the "#" prompt (the password will
not echo) and then press the ENTER key again in response to the
Enter Username> prompt. When you get the Local> prompt, type:
SET NETWARE NPRINTER nlm number ON service
SET NETWARE RESCAN
EXIT
•
Where nlm is the name of the PSERVER NLM on your file
server.
•
Number is the printer number (must match the printer number
you selected during the PCONSOLE configuration in the
previous steps).
•
Service is the name of the service assigned by NetWare Print /
Fax server name(where the default services are
BRN_xxxxxx_P1 for the Brother printer, where "xxxxxx is the
last six digits of the Ethernet address (MAC address)).
For example, to set up remote "Printer 3" for a Brother MFC with the Print / Fax
server BRN_310107_P1 using the PSERVER NLM called BROTHER1PS, you
would type:
SET NETWARE NPRINTER BROTHER1PS 3 ON BRN_310107_P1
SET NETWARE RESCAN
EXIT
•
You can also enter the remote printer name using your web browser by
connecting to the Brother Print / Fax server using the TCP/IP protocol and
selecting the NetWare protocol configuration.
The same services assigned by NetWare Print / Fax server name cannot be used
for both queue server mode and remote printer mode.
You must now unload the PSERVER NLM from your NetWare file server
console and then reload it in order for the changes to take effect.
