CHAPTER 9 NOVELL NETWARE PRINTING
9-16
Configuring the Brother Print / Fax server
(Remote Printer Mode using PCONSOLE
and BRCONFIG
1.
Make sure that the PSERVER NLM (NetWare Loadable Module) is
loaded on your file server.
2.
Log into the file server from your PC workstation as ADMIN if you are
using NetWare 4.1x (if you want NDS support, do not login under
bindery mode). If you are using NetWare 2.xx or 3.xx, login as
SUPERVISOR.
3.
Run the PCONSOLE utility from your PC workstation.
4.
If you are creating a new print queue, select Print Queue Information
(NetWare 3.xx) or Print Queues (NetWare 4.1x) from the Available
Options menu.
5.
Press INSERT, type in the desired print queue name (with NetWare
4.1x, you will also be asked for a volume name; press INSERT and
select the appropriate volume), and press ESCAPE to return to the main
menu.
The following steps apply to configuring a remote printer with NDS support
on NetWare 4.1x systems:
6.
a.
Select Print / Fax servers from the PCONSOLE menu and then
select the name of the PSERVER NLM on your host computer.
b.
Select Printers.
c.
Press INSERT to get Object, Class menu.
d.
Press INSERT and enter the Printer Name (any unique name is
OK).
e.
Highlight the printer name and press ENTER twice to get Printer
Configuration Menu.
f.
PCONSOLE will assign a Printer Number. Remember this number,
since it will be used later.
g.
Highlight Print Queues Assigned and press ENTER and then
INSERT to get a list of available queues.
h.
Highlight the name of the print queue you wish to assign to the
remote printer and press ENTER.
i.
The other settings in the menu are not required. Push ESCAPE
several times to exit PCONSOLE.
j.
Skip to the Assigning the remote printer name and number sections
below.
