BRONKHORST mini CORI-FLOW ML120 Скачать руководство пользователя страница 31

Страница: 31 / 65

Bronkhorst®

Instruction Manual mini CORI-FLOW ML120

9.17.097G

Digital parameters

Each instrument is controlled internally by a number of digital parameters, most of which can only be accessed via digital

communication. Each communication protocol uses its own methods for communicating with instruments and accessing

parameters.

FLOW-BUS

Instruments in a FLOW-BUS system can be configured and operated using the free Bronkhorst® FlowWare tools. These tools

provide a graphical interface to the ProPar protocol (used by FLOW-BUS), for monitoring and changing instrument settings.

Digital communication between the instrument and the client software (e.g. FlowPlot, FlowTune™) is handled by FlowDDE, a

Dynamic Data Exchange server (DDE), the core component of the FlowWare software.

The FlowWare tools and associated documentation can be downloaded from

http://www.bronkhorst.com/en/downloads

Modbus

Instruments in a Modbus system can be monitored and operated using third party software as a master device, such as

LabVIEW, ModScan, or a Modbus PLC.

PROFIBUS-DP

Instruments in a PROFIBUS DP system can be monitored and operated using third party software as a master device, such as

SyCon® (by Hilscher GmbH) or Step 7 for PLC (by Siemens).

To configure a device, a so-called GSD file (General Station Description) can be loaded into the software. The GSD file

contains all necessary configuration information to operate the device in a PROFIBUS DP system, including communication

and network configuration, all available operating parameters, their data types, and supported data ranges.

A GSD file for Bronkhorst® instruments can be downloaded from

http://www.bronkhorst.com/en/downloads

DeviceNet™

Instruments in a DeviceNet™ system can be monitored and operated using third party software as a master device, such as

SyCon® (by Hilscher GmbH) or Step 7 for PLC (by Siemens).

To configure a device, a so-called EDS file (Electronics Data Sheet) can be loaded into the software. The EDS file contains all

necessary configuration information to operate the device in a DeviceNet™ system, including communication and network

configuration, all available operating parameters, their data types, and supported data ranges.

An EDS file for Bronkhorst® instruments can be downloaded from

http://www.bronkhorst.com/en/downloads

PROFINET

Instruments in a PROFINET system can be monitored and operated using third party software as a master device, such as

PROFINET Master Simulator (by Bihl + Wiedemann) or Step 7 (for PLC by Siemens).

To configure a device, a so-called GSDML file (General Station Description Markup Language) can be loaded into the

software. The GSDML file contains all necessary information, in XML format, to operate the device in a PROFINET system,

including communication and network configuration, all available operating parameters, their data types, and supported

data ranges.

A GSDML file for Bronkhorst® instruments can be downloaded from

http://www.bronkhorst.com/en/downloads

EtherCAT®

Instruments in an EtherCAT® system can be monitored and operated using third party software as a master device, such as

SyCon® (by Hilscher GmbH).

To configure a device, a so-called ESI file (EtherCAT® Slave Information) can be loaded into the software. The ESI file contains

all necessary configuration information to operate the device in a EtherCAT® system, including communication and network

configuration, all available operating parameters, their data types, and supported data ranges.

An ESI file for Bronkhorst® instruments can be downloaded from

http://www.bronkhorst.com/en/downloads

Содержание mini CORI-FLOW ML120


































































Результаты поиска

Содержание mini CORI-FLOW ML120

Отзывы:

Похожие инструкции для mini CORI-FLOW ML120

Бренды по названию

Популярные бренды

BRONKHORST mini CORI-FLOW ML120, Инструкция по эксплуатации

Результаты поиска

Содержание mini CORI-FLOW ML120

Отзывы:

Похожие инструкции для mini CORI-FLOW ML120

Бренды по названию

Популярные бренды